This document is the user's manual for the Dark Matter Arcade Fighting Stick (P/N 43710).
Function Description:
The Dark Matter Arcade Fighting Stick is a gaming peripheral designed to emulate the experience of arcade fighting games. It features an 8-direction control stick and eight action buttons, allowing users to perform various in-game actions and triggers. The device is compatible with a range of gaming systems, including PlayStation® 4 (PS4™, PS4 Slim, PS4 Pro), Xbox One™ (Xbox Series S™, Xbox Series X™), Nintendo Switch®, Windows® 7 or later PCs, and Android™ 4.0 or later devices.
Important Technical Specifications:
- P/N: 43710
- Compatible Systems: PlayStation® 4, Xbox One™, Windows® 7 or later, Android™ 4.0 or later, Nintendo Switch®
- Input Power: 5 VDC, 500mA
- Frame Material: Aluminum alloy
- Panel Material: Acrylic
- Joystick/Button Manufacturer: Sanwa® Denshi
- Dimensions: 15.7" x 9.8" x 5.2" (400 x 250 x 132 mm)
- Weight: 7.7 lbs. (3500 g)
Usage Features:
The Arcade Fighting Stick offers several features for enhanced gameplay and customization:
- Control Stick: An 8-direction control stick that can be configured via the CONTROL STICK SWITCH to emulate a D-Pad (DP), Left Analog Stick (LS), or Right Analog Stick (RS).
- Action Buttons: Eight buttons arranged in two rows, designed to emulate various buttons and triggers found on standard controllers.
- Turbo Function: The TURBO SWITCH allows users to enable a turbo function for any of the action buttons by simultaneously pressing the desired action button and sliding the switch to the ON position.
- Home Button: Emulates the HOME button on a controller.
- Share Button: Emulates the SHARE button on a controller.
- Options Button: Emulates the OPTIONS button on a controller.
- L3/R3 Buttons: Dedicated buttons that emulate the L3 and R3 buttons on a controller.
- Switch/Touchpad Button: This button momentarily emulates the touchpad button on a controller. It also serves as a mode switch:
- When connecting to PS4™ or Xbox® consoles, pressing and holding for 2 seconds switches to console mode.
- When connecting to a PC or Android™ device, pressing and holding for 2 seconds switches between DirectInput and XInput modes.
- Key Lock Function: The KEY LOCK BUTTON toggles the key lock feature on or off. When activated, the HOME, SHARE, OPTIONS, L3, and R3 buttons are disabled to prevent accidental presses during intense gameplay. Two KEY LOCK LEDS indicate the key lock status and also provide feedback during connection procedures.
- USB Port: A dedicated USB port for connecting an original Xbox® or PS4™ controller. This connection is required for the Arcade Fighting Stick to function properly with Xbox and PS4 consoles. Nintendo Switch®, PC, and Android™ devices do not require an additional controller.
- Built-in Cable: The device includes a built-in cable for connecting to gaming systems. This cable is stored within a STORAGE SPACE on the rear panel.
- Cable Outlet: A small hole in the STORAGE SPACE cover allows the cover to be closed while the built-in cable is connected to a system.
Connecting the Fighting Stick:
- PS4 Consoles: Ensure the DualShock® controller is off. Open the STORAGE SPACE, pull out the built-in cable, position it in the CABLE OUTLET, and close the cover. Plug the built-in cable into a PS4 USB port. Press and hold the SWITCH/TOUCHPAD BUTTON for 2 seconds to enter console mode (KEY LOCK LEDs flash alternately). Plug one end of the included USB Cable into the DualShock controller and the other end into the USB PORT on the Arcade Fighting Stick (both KEY LOCK LEDs illuminate for 3 seconds, then return to indicating KEY LOCK status). Press the HOME button to start the game. If connection fails, the KEY LOCK LEDs flash three times.
- Xbox Consoles: Similar to PS4 connection, but involves an Xbox controller. Open STORAGE SPACE, pull out built-in cable, position it in CABLE OUTLET, and close the cover. Plug the built-in cable into an Xbox® console USB port. Press and hold the SWITCH/TOUCHPAD BUTTON for 2 seconds to enter console mode (KEY LOCK LEDs flash alternately). Plug one end of the included USB Cable into the Xbox controller and the other end into the USB PORT on the Arcade Fighting Stick (both KEY LOCK LEDs illuminate for 3 seconds, then return to indicating KEY LOCK status). Press the HOME button to start the game. If connection fails, the KEY LOCK LEDs flash three times.
- Nintendo Switch Console: Open STORAGE SPACE, pull out built-in cable, position it in CABLE OUTLET, and close the cover. While pressing and holding the A and X buttons on the Arcade Fighting Stick, plug the built-in cable into the USB port on the Switch dock.
- Windows PC/Android: Open STORAGE SPACE, pull out built-in cable, position it in CABLE OUTLET, and close the cover. Plug the built-in cable into a USB port on your PC or Android device. After 30 seconds, the KEY LOCK LEDs will flash three times, then return to indicating KEY LOCK status. By default, it starts in XInput mode. To switch to DirectInput mode, press and hold the SWITCH/TOUCHPAD BUTTON for 2 seconds (KEY LOCK LEDs flash alternately). To switch back to XInput mode, press and hold the SWITCH/TOUCHPAD BUTTON for 2 seconds.
Maintenance Features:
The Arcade Fighting Stick is designed for user maintenance and customization:
- Button Replacement:
- Open the STORAGE SPACE, remove the Hex Screwdriver, and close the cover.
- Use the Hex Screwdriver to remove seven screws securing the base plate.
- Remove the base plate.
- Disconnect the wire from the button to be replaced.
- Press the plastic tabs on each side of the button to remove it from the top panel.
- Insert the new button into the top panel and rotate until it clicks into place.
- Reconnect the wire to the button, following the provided color-coded wiring chart (e.g., Yellow-LB, Green-RB, Red-Y, Brown-X, Orange-LT, Blue-RT, Black-B, Purple-A).
- Position the base plate and secure it with the seven screws.
- Open the STORAGE SPACE, insert the Hex Screwdriver, and close the cover.
- Panel Wallpaper Replacement:
- Open the STORAGE SPACE, remove the Hex Screwdriver, and close the cover.
- Use the Hex Screwdriver to remove seven screws securing the base plate.
- Remove the base plate.
- Remove all wires from the buttons.
- For each button, press the plastic tabs to remove it from the top panel.
- Use a flat blade screwdriver (not included) to secure the center shaft at the bottom of the joystick, then unscrew the small ball at the top of the joystick.
- Use the Hex Screwdriver to remove six screws securing the top panel to the frame, then remove the top panel.
- Remove the existing panel wallpaper and replace it with a preferred design.
- Position the top panel and secure it with the six screws.
- Secure the center shaft with a flat blade screwdriver, then screw the small ball back onto the joystick.
- For each button, insert it into the top panel and rotate until it clicks.
- Reconnect all wires to the buttons, following the color-coded wiring chart.
- Position the base plate and secure it with the seven screws.
- Open the STORAGE SPACE, insert the Hex Screwdriver, and close the cover.
- Storage Space: A covered compartment on the rear panel for storing the included Hex Screwdriver and the built-in USB cable.
- Cleaning: Clean the device using a soft, dry cloth only. Avoid chemical cleaners, solvents, or detergents. For stubborn deposits, moisten the cloth with warm water.
Safety Warnings and Guidelines:
- Intended for indoor use only.
- Do not expose to water or moisture; avoid placing drinks or containers with moisture near the device.
- Do not expose to excessive vibration, extreme force, shock, or fluctuations in temperature/humidity.
- Do not expose to excessively high temperatures.
- Do not place or install in areas with excessive dust, humidity, oil, smoke, or combustible vapors.
Need help?
General
To Next Page