Need help?Do you have a question about the Darkglass Microtubes X Series and is the answer not in the manual?
General| Bypass Switching | True Bypass |
|---|---|
| Technology | Analog |
| Input Impedance | 1 MΩ |
| Output Impedance | 1 kΩ |
| Frequency Response | 20 Hz - 20 kHz |
| Inputs | 1 x 1/4" |
| Outputs | 1 x 1/4" |
| Power Source | 9V DC |
| Weight | 430 g |
Controls the cutoff frequency for distortion, ranging from 100Hz to 1kHz.
Sets the amount of distortion for the high-pass signal side.
Sets the output volume for the distorted high-pass signal.
Controls the cutoff frequency mixed back to the high-pass side (50Hz-500Hz).
Sets the amount of compression for the low-pass signal.
Sets the output volume for the low-pass signal.
Sets the overall output volume of the unit.
Includes low shelf, 500 Hz, 1 kHz, and high shelf adjustments.
Details power requirements, adapter use, and potential damage from incorrect usage.
Instructions for activating warranty and contacting support.
Input/Output Impedance, Current Consumption, and Voltage requirements.
Provides Width, Height, Depth, and Weight of the unit.
To Next Page
