darTZeel NHB-108 One - User Manual

darTZeel NHB-108 model one
Owner's Manual

Summary

Rear Panel Connections

50Ω BNC Zeel Inputs

Specialized 50 Ohm BNC Zeel inputs for optimal audio signal transmission.

Speaker Terminals

Terminals for connecting loudspeakers to the amplifier output.

Input Impedance Selector

4. Connecting and Setup

4.2. Speaker Impedance Compatibility

Information on compatible speaker impedances and critical minimum values for optimal performance.

5. Using the Amplifier

5.1. Power Cycle Management

4.3. Input Selection

4.4. Powering On Procedure

5.2. Understanding the Eyes

5.3. User Configurable Parameters

6. Maintenance Procedures

6.1. Fuse Replacement Guide

Detailed steps for safely replacing blown fuses in the amplifier.

7. Advice and Tips

7.1. Prohibited Actions

Crucial warnings and actions to avoid to prevent damage or malfunction.

7.2. Troubleshooting Common Issues

7.2.1. Eyes Indicators Closed

7.2.2. No Sound When Powered On

Diagnosing and resolving issues where the amplifier is on but no sound is produced.

7.2.4. Frequent Fuse Blowouts

Understanding why fuses might blow and the importance of using correct ratings.

7.2.7. Blinking Eye Indicators

7.2.8. Fuse Melting on Power Up

9. Warranty Conditions

10. Product Support and Assistance

11. Technical Specifications

darTZeel NHB-108 One Specifications

General

Type	Solid-state stereo power amplifier
Output Power (8 Ohms)	100 W per channel
Gain	26 dB
Input Impedance	50 kOhms
Weight	30 kg
Dimensions	440 x 335 x 170 mm
Inputs	1 x XLR, 1 x RCA
Outputs	2 pairs of speaker terminals