Need help?Do you have a question about the DAS company P50 and is the answer not in the manual?
Instructions for unfolding and connecting tent pipes using specified connectors and screws for different tent lengths.
Connecting roof connectors with horizontal cantilevers and attaching them to the main structure using specific connectors.
Guidance on installing roof pulls on tent segments to form an X shape for added stability.
Procedure for lifting the tent structure by raising one side and then the other, with notes on pipe orientation.
Adding extension pipes for 2.5m or 3m long tents during the raising process.
Alternative method for adding extension pipes for 2.5m or 3m long tents during raising.
Instructions for attaching corner feet, side feet, and front/back feet to the tent frame and securing them.
Connecting main pipes and securing them to feet and connectors, ensuring external installation.
Installing side pulls on tent segments to form an X shape for enhanced stability.
Installing horizontal brackets on tent entrances for increased height and support.
Attaching side cantilevers with vertical and roof pipes for structural reinforcement.
Connecting two reinforcements with vertical and roof pipes for enhanced structural support.
General| Brand | DAS company |
|---|---|
| Model | P50 |
| Category | Tent |
| Language | English |
To Next Page
