10 ∙ Using Your Toaster Using Your Toaster ∙ 11
GETTING STARTED
1. Place the Clear View Toaster on a clean and stable surface. Make sure that no liquids or ammable
objects are near the appliance.
2. Place the bread slices in the Toasting Slot. Press the Carriage Lever down until it locks into place to
start the heating process. If the handle doesn’t lock, check if the appliance is plugged in. The Carriage
Lever will not click into place if the toaster is not plugged in.
3. Turn the Browning Dial to the desired level. The higher the number, the more toasted your bread will
be. You can stop the toasting process at any time by simply pressing the Cancel Button.
4. Always unplug the appliance after use and let it cool down before cleaning or storing. When
storing the Clear View Toaster, wind the power cord around the hooks located on the bottom of
the appliance.
Note: Never stick your bare hands in the Toaster to remove food.
Thoroughly toasts frozen bread with an extended toasting cycle.
Reheats already toasted bread or toasts bread that is not browned enough.
Toasts bagels by using only one side of the heating element.
DEFROST
REHEAT
BAGEL
TYPE DESCRIPTION
BROWNING DIAL
Seven heating levels
give you precise toasting
results. Simply select your
desired browning level
from the chart below.
1 2 3 4 5 6 7
To Next Page
Loading...
General