EasyManua.ls Logo

Dash DDTM200 - Cleaning & Maintenance

Dash DDTM200
17 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
∙ 12 ∙
USING YOUR rapid EGG COOKER
using your mini dog treat maker
Once the dog treats are cooked (see cooking times in our Recipe
Guide on page 19), carefully remove them from the Cooking
Surface with a heat-resistant nylon, wood, or silicone cooking
utensil (photo E).
NOTE: Do not use metal utensils to remove or place food on the
Cooking Surface as this will damage the nonstick surface.
When you have nished cooking, unplug your Mini Dog Treat
Maker and allow it to cool before moving or cleaning.
Allow dog treats to cool and serve!
5
6
E F
∙ 13 ∙
CLEANING & MAINTENANCE
Always allow the appliance to cool completely before moving, cleaning, or
storing. Do not submerge appliance in water or any other liquids. Never
use abrasive cleaning agents to clean your appliance as this may damage
the Mini Dog Treat Maker.
In order to keep your Mini Dog Treat Maker in pristine working order,
thoroughly clean the appliance after each use. This will prevent the build-
up of food or oil.
EVERYDAY CLEANING
Unplug Mini Dog Treat Maker and allow it to cool completely.
Using a damp, soapy cloth, wipe down the Cooking Surface and Cover.
Thoroughly rinse the cloth and wipe again.
Thoroughly dry Mini Dog Treat Maker before storing.
FOR TOUGH STAINS
If there is food burned onto the Cooking Surface, pour on a little
cooking oil and let sit for 5 to 10 minutes.
Scrub the Cooking Surface with a sponge or soft bristled brush to
dislodge food.
Use a damp, soapy cloth to wipe down the Cooking Surface.
Thoroughly rinse the cloth and wipe again.
If any food remains, pour on cooking oil and let sit for a few hours,
then scrub and wipe clean.
Never use abrasive cleaning agents to clean your appliance as this may
damage the Mini Dog Treat Maker and its nonstick Cooking Surface.

Other manuals for Dash DDTM200