Dash DSIM100 - Disassembly & Assembly

disassembly & assembly ∙ 13 12 ∙ disassembly & assembly
Lift up the Motor Unit to release from the Base.
The Dash Shaved Ice Maker is now disassembled.
Remove the Gear Hoop from the Exterior Bowl then remove the
Exterior Bowl.
Remove the Interior Bowl.
First make sure the unit is unplugged, then remove the Dial from the
Interior Bowl by turning counter clockwise.
4
5
2
1
3
TO ASSEMBLE:
TO disassemble:
Always ensure that the appliance is switched off and that it is not plugged into an
electrical outlet before you disassemble or assemble the Dash Shaved Ice Maker.
Disassembly & AssemblY
To assemble the Shaved Ice Maker simply follow the steps in reverse order.