Page Title Page Titleusing your Mini Bundt® maker
1
2
Remove the Mug from the freezer and place it on a stable surface.
Fit the Motor onto the Lid until the pins on the Motor t into the slots
of the Lid (photo A).
Fit the Paddle into the slot located on the base of the Motor until
it clicks (photo B).
using your ice cream maker
B
using your ice cream maker
A
C
∙ 10 ∙ ∙ 11 ∙
Lower the Cover with Motor and Paddle attached into the Mug.
Make sure the pins along the edge of the Cover align with the notches
on the edges of the Locking Base on the Mug. Then, turn clockwise
until the Cover and Base lock together (photo C).
Plug the Ice Cream Maker in and press the Power Switch. The Paddle
will begin to rotate.
4
3
NOTE: The My Mug Ice Cream Maker can hold up to 1 cup of liquid
mixture. Do not exceed 1 cup when preparing your ice cream.
D
To Next Page
Loading...
Need help?
General
