Daspi LINEA User Manual

producT
The gear motor LINEA has been planned and built in
order to opening swing gates with leaves length max 2,2
mt. and with a maximum weight of 150 kg. DASPI is not
responsible for any anomalous and different use of the
gear motor LINEA.
IMPORTANT: The gear motor LINEA is not provided with
mechanical clutch and must be installed with its DASPI
control panel or with a control panel provided with
electronic clutch.
use oF the automation
As the automation can be controlled from the distance
through a remote control, you must always check the
full efficiency of all the safety devices. We recommend
inspecting periodically (every 6 Month) by qualified people
the adjustment of the electronic clutch. If you need to
calibrate the protection consult the paragraph “Adjustment
of the electronical clutch” in the instruction booklet of the
electronic central unit.
preliminary checks
• Readcarefullytheinstruction.
• Checkthattheproducthasnotbeendamageduringthe
transport.
• Checkthatthegatestructureisstrongandthatduringits
movement there aren’t friction points
• Checkthattheelectricalinstallationisinaccordancewith
the characteristic required by the gear motor.
• Checkthatthereisasuitablegroundsafetysystemand
that the metallic parts of the installation are connected.
• Check that the manual manoeuvre always is easily
practicable.
• Remember that the automation makes easy the use of
the gate but don’t resolve the problems due to a defective
installation or to a faulty of upkeep.
lubriFication
The gear motor LINEA is provided with permanent
lubrification
sE c u r I t y
D I s t A N c E
mE c h A N I s m
IN m o u V E m E N t
Do N o t I N s t A L L t h E
A u t o m A t I o N IN p L A c E f u L L
o f E x p L o s I V E m o I s t u r E s
EL E c t r I c s h o c k us E
t h E
g L o V E s
us E g L A s s E s
f o r W E L D I N g
kE E p t h E p r o t E c t I o N
c A r t E r
general saFety rules
Our compliments for your excellent choice. Your new
electromechanical barrier has been produced according to a
high quality and strict reliability, that’s why it will assure you
long-lasting performance. This booklet will offer you all the
pieces of information you may need to install your barrier and
to safe guard your safety.
All our products have been made in conformity with the
regulations in force. We recommend using original part only,
during the installation and the upkeep. However, the caution
is unquestionably indispensable and nothing is better than
preventing accidents.
imporTanT
Any installation or repair, or adjustment of the working
machinery by unqualified people is strictly prohibited unless
all the necessary precautions: power supply disconnected
(included possible batteries). All moving mechanism must be
provided with suitable protections.
DASPI is not responsible for any possible damages or injuries
to people, object or animals, caused by any use not provided
for this booklet and/or any unauthorized modification of the
product. Keep scrupulously this booklet enclosing it with
technical brochure of installation in a suitable place well-know
by all the interested people. You have to operate the elimination
of the packing material (cardboard, plastic, polystyrene, etc.) in
conformity with the regulations in force, remembering that for
a child a plastic envelope could be extremely dangerous. You
have to teach the people employed in using the automation
about the control and security systems of the installation.Don’t
install this product in explosive places.
Upkeep
For any kind of upkeep, you have always to cut off the power
supply.
For a correct upkeep of the installation where you have installed
the gear motor LINEA follow carefully these instructions:
Clean periodically the photocells.
Checking by qualified people the electronic clutch (see the
paragraph “Installation of the electronic central unit”).
Lubrificate periodically the guide and the wheel of the gate.
In case of malfunction going and seeing qualified people.
demoliTion
You have to operate the elimination of the materials in
conformity with the regulations in force. All material must be
divided by type (copper, aluminium, plastic, electrical central
unit). However there are not material considered dangerous for
the handler.
Dismantling
In order to dismantle or to move away the automation, follow
these instructions:
Cut off the power supply and disconnect the electrical
installation.
Dismantle the control console and all the other components of
the installation.
If you have noticed that some components have been damaged,
you have to replace them.
english

Daspi LINEA Specifications

General

Brand	Daspi
Model	LINEA
Category	Garage Door Opener
Language	English