Daspi PASSAGE - Programming and Adjustment; Programming the Buttons; Electrical Instructions; Maneuver Programming

PASSAGE
PROGRAMMING AND ADJUSTMENT
1. Programming the buttons
-(DOWNWARDS) + (UPWARDS) (P) PROGRAMMING (S) WIFI
2. Electrical instructions
When connecting the motor to the power supply, LED1 and LED2 will flash 3
times. The motor will remain in stand-by.
3. Programming the maneuver
3.1 Press and hold button “P” until
LED2 remains fixed.
3.2 Press and hold the + button until
the door reaches the desired opening
point.