PASSAGE
ATTENTION: the UPWARDS and DOWNWARDS buttons can be used to move
the door in these directions as much as necessary.
3.3 Once the door reaches the desired
opening position, press the “P” and
LED1 will light up.
3.4 Press and hold the button until the
door reaches the desired closing
position.
ATTENTION: the UPWARDS and DOWNWARDS buttons can be used to move
the door in these directions as much as necessary.
3.5 Once the door is in the desired
closed position press “P”. The LED will
flash and turn off.
ATTENTION: Do not press the “P” for long time. When the LED3 starts
flashing, stop pressing the button.
To Next Page
Loading...