Need help?Do you have a question about the Data Aire DAPA-05 and is the answer not in the manual?
General| Airflow | Not available |
|---|---|
| Power | Not available |
| Noise Level | Not available |
| Weight | Not available |
| Dimensions | Not available |
Crucial safety warnings and general advice for installing the unit.
Environmental and structural requirements for the installation space.
Detailed procedures for safely moving, lifting, and rigging the unit.
General best practices for refrigerant piping installation.
Specifics for field refrigerant piping for split air-cooled systems.
Tables providing recommended line sizes based on tonnage and length.
Table for sizing hot gas lines based on unit tonnage and line length.
Table for sizing liquid lines based on unit tonnage and line length.
Table for sizing suction lines based on unit tonnage and line length.
Diagram and notes for piping a remote condenser located above the evaporator.
Diagram and notes for piping a remote condenser located below the evaporator.
Guidelines for setting up the condensate drain system.
Detailed instructions for fabricating a proper condensate trap.
Safety measures and protection for refrigerant piping systems.
Piping requirements and considerations for water/glycol cooled units.
Procedures for thorough leak testing of the entire system.
Guidelines for proper field power and control wiring.
Process for system startup, verification, and functional testing.
DANGER warnings regarding arc flash, electric shock, and proper PPE.
WARNING and NOTICE statements for safe electrical connections.
Best practices for running and connecting field wiring.
Important notices regarding POE oil, atmosphere exposure, and charging procedures.
Recommended procedure for system evacuation and dehydration.
Detailed steps for the first stage of system evacuation.
Detailed steps for the second stage of system evacuation.
Detailed steps for the third stage of system evacuation.
Detailed steps for the final stage of system evacuation.
Preparatory steps before initiating refrigerant charging.
Calculating the required refrigerant weight for line sets.
General guidance and warnings for charging the refrigeration system.
Safe handling, recovery, and disposal of refrigerants.
Detailed steps for charging fixed speed compressors.
Charging procedures for systems with low ambient receiver packages.
Charging fixed speed compressors, considering receiver and head pressure.
Function, adjustment, and operation of the Thermal Expansion Valve (TXV).
Overview of the Mini-dap4 microprocessor controller and its functions.
Procedures for checking, replacing, and maintaining air filters.
Safety precautions and operation of EC motors.
Checklist items for inspecting and maintaining air filters.
Checklist items for compressor checks (monthly and quarterly).
Guide to diagnosing issues related to superheat and suction pressure.
To Next Page
