2
The EASYSENSE Q Advanced data logger
A USB communication cable
A power supply unit (UK version shown)
Two long Smart Q sensor leads
Two short Smart Q sensor leads
The EASYSENSE software with
Quick Start Guide
What’s in the storage bag?
Note: If EASYSENSE Q Advanced is to be connected via a USB port, it is only suitable for use
on a computer with an operating system that supports USB e.g. 98SE, 2000, Me and XP. It will
not be supported by Windows 95, 98 or Windows NT (workstation and server).
Note: The battery pack in EASYSENSE Q Advanced is fully charged before it leaves Data
Harvest. Even when turned off, EASYSENSE Q Advanced will use a small amount of current,
and the battery will slowly empty. If the unit is to be stored for long periods without use then it is a
good idea to recharge the batteries fully every 6 – 8 weeks. See page 24.
To Next Page
Loading...
