DataCard LM200 Installation Guide

SR200 & SR300 Card Printers and LM200 & LM200 Laminators Installation Guide 21
Downloading and Installing the Identive Driver Manually
Usethedriverinstallationwizardifthedriverdoesnotinstallautomaticallywhenyourprinteris
connectedtoyourcomputer.
1. GetthedriverfortheIdentivereaderfromDatacard.com.
a. AccesstheDatacardwebsiteatwww.datacard.com/id.
b. SelectSupport&Drivers,andthenDrivers&Downloads.
c. Enterthemodelofyourprinter
andclickGo.
d. Inthesearchresultsfortheproduct,selectDrivers&Downloadsunderthemodelyou
haveselected.
e. SelectthecorrectsmartcarddriverandclickSave.Followthepromptstosavethefileto
yourPC.
2. Double‐clickthedriverfilesetup.exe.
Theinstallationwizardfor
thedriverdisplays“PreparingtoInstall.”
3. Theinstallationwizarddisplaysawelcomepage.ClickNexttoadvance.
If the driver fails to install or does not display as Identive CLOUD 4000 F DTC in Devices
andPrinters
, get the driver download at Datacard.com and install the driver manually.
Follow the instructions in “Downloading and Installing the Identive Driver Manually”
(below).

DataCard LM200 Specifications

General

Brand	DataCard
Model	LM200
Category	Laminator
Language	English