Datacolor SpyderCHECKR User Manual

QUICK START GUIDE
What You Get
• Spyder
®
CHECKR Case
• SpyderCHECKR Target Color Cards
• Serial Number
• Welcome Card – Including warranty information and download instructions
System Requirements
• Windows 7 32/64, Windows 8.0, 8.1 32/64, 10 32/64
• Mac OS X 10.7 or higher
• Monitor Resolution 1280x768 or greater, 16-bit video card (24 recommended),
1GB of available RAM, 500MB of available hard disk space.
• Internet connection for software download
Support
support.datacolor.com

Datacolor SpyderCHECKR Specifications

General

Color Patches	48
Material	Plastic
Category	Camera Accessories
Type	Color Calibration Tool
Gray Balance Target	Yes
Weight	8 oz / 226.8 g
Software Compatibility	SpyderCHECKR Software
Compatibility	Digital Cameras
Material Detail	Durable

Summary

SpyderCHECKR Workflow

Step 1: Take Photos

Capture RAW images of the SpyderCHECKR target, ensuring even lighting from 45-degree angles.

Step 2: Install and Activate Software

Download and install the SpyderCHECKR software from the Datacolor website and activate it using the serial number.

Step 3: Calibrate Monitor

Ensure your monitor is calibrated using a colorimeter, performing recalibration if needed.

Step 4: Adjust in Editing Software

Upload target images to editing software like Lightroom or Photoshop and adjust based on reference patches.

Step 5: Save and Apply Preset

Launch SpyderCHECKR software, align target patches, save calibration, and apply the preset in your editing software.