Do you have a question about the DataDirect Networks SFA12K-20E and is the answer not in the manual?
Instructions for unpacking the SFA12K system, including inspection for damage and retaining packaging.
Step-by-step instructions for installing a disk module into an enclosure.
Guides on accessing the ATS web interface for configuration, including IP addresses and login.
Instructions for configuring ATS parameters like nominal AC voltage and VRMS limits.
Step-by-step guide to change network interface settings using the UI command.
Guide to creating storage pools, which are collections of physical disks for host systems.
Instructions on creating virtual disks, which are storage units presented to hosts.
Steps to create a presentation, mapping virtual disks to hosts for access.
Detailed instructions for installing the SFA12K controller into a rack using slide rails.
| Model | SFA12K-20E |
|---|---|
| Category | Storage |
| Form Factor | Rack-mountable |
| RAID Support | Yes |
| Power Supply | Redundant power supplies |
| Cooling | Redundant cooling fans |
| RAID Level | RAID 0, RAID 1, RAID 5, RAID 6, RAID 10, RAID 50, RAID 60 |
| Operating System Compatibility | Linux, Windows |