Need help?Do you have a question about the Datalogic BC9xx0-STAR and is the answer not in the manual?
General| Type | Battery Charger |
|---|---|
| Input Voltage | 100-240 VAC |
| Output Voltage | 5 VDC |
| Input Frequency | 50/60 Hz |
| Charging Time | 4 hours |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Storage Temperature | -20 to 70 °C (-4 to 158 °F) |
Describes the status indications provided by the LEDs on the BC9xx0 cradle.
Details the components and methods for mounting the BC9xx0 cradle.
Details the Ethernet connection for BC9x80 models, including ports.
Details the multi-interface connector for non-Ethernet connections.
Methods for configuring BC9x80 Ethernet models using software or bar codes.
Methods for configuring non-Ethernet BC9xx0 models.
Explains scanning programming bar codes to select the appropriate interface type.
Programming bar codes for Ethernet interface configuration (Standard/IP).
Bar codes for Static and Dynamic IP Addressing for Ethernet interface.
Programming bar codes for configuring RS-232 interfaces.
Programming bar codes for USB COM and USB Keyboard interfaces.
Bar codes for selecting USB Keyboard and Wedge interfaces.
Instructions for resetting the reader to its standard factory default settings.
Details supply voltage, power consumption, and indicators for the device.
Specifies frequency, programmable speed, typical range, and number of devices.
To Next Page
