POWER THE DOCK
CAUTION: Use only the Datalogic
power supply 94ACC0197 to power
the dock.
CHARGE THE MEMOR 11/10
Insert the device into the dock with the screen facing
front and the head facing up.
The dock is able to provide wireless power to the
Memor 11/10 when the device is correctly inserted.
CAUTION: Make sure there is nothing
between the dock and the device.
Do not put any foreign object such as,
but not limited to, coins, paper clips,
stickers inside the slot of any of the
docks.
Do not apply any sticker to the Memor
11/10 (see the examples below).
WARNING: Do not attempt to charge any
other device different from the Memor
11/10 devices.
LED INDICATORS
LED Behavior Operation Status
Power ON
Solid green Dock is powered
Foreign Object Detection (FOD)
Blinks red Foreign object detected, output
power is disabled.
TECHNICAL SPECIFICATIONS
Eletrical Features
Indicators Consumption Power on LED (green)
FOD LED (red)
Environmental Features
Charging Temperature 0°C to 40°C
Operating Temperature -10°C to 50°C
Storage Temperature -30°C to 70°C
Humidity 5-95% non condensing
Mechanical Features
Dimensions 109.5 x 105 x 125 mm / 4.3 x
4.1 x 4.9 in
Weight 248 g / 8.75 oz
To Previous Page
Loading...
Need help?
General
