Need help?Do you have a question about the Datalogic QuickScan QBT2101 and is the answer not in the manual?
General| Type | Handheld |
|---|---|
| Scanning Technology | Laser |
| Scan Rate | 400 scans/sec |
| Drop Specification | 1.5 m |
| Power Supply | Rechargeable Li-ion battery |
| Compliance | CE, FCC, RoHS |
| Connectivity | Bluetooth |
| Interface | USB, RS-232 |
| Resolution | 4 mils |
| Humidity | 5% to 95% (non-condensing) |
| Light Source | 650 nm |
| Supported Barcodes | 1D barcodes |
| Radio Range (Bluetooth) | Up to 25 m |
Explains how to secure the reader in the base station for electrical contact.
Details how to physically connect cables to the base station.
Explains the meaning of various LED indicators on the radio base.
Instructions for charging the reader's battery pack via the base or USB.
Step-by-step guide on how to remove and install the battery pack.
Instructions on how to aim and scan bar codes with the reader.
Procedures for establishing a wireless link between the handheld reader and the base.
Steps for connecting the reader to a host via Bluetooth in SPP mode.
Steps for connecting the reader to a host via Bluetooth in HID mode.
How to use bar codes in the manual to reconfigure reader settings.
Instructions to restore the reader to its factory default settings.
Lists the supported host interfaces for the base station.
Instructions on scanning bar codes to select the correct interface type.
Details available RS-232 interface configurations for the base station.
Describes the USB-OEM interface configuration for the base station.
Lists various keyboard interface configurations supported by the base.
Lists the 1D bar codes that the reader can decode.
To Next Page