Datalogic SE-SR2 User Manual

SE-SR2
Operating instructions SE-SR2
826002433-EN-Rev.C
12
CH.2
Safety contacts of channel 2 are closed.
Faults – Interference
} Earth fault: The supply voltage fails and the safety contacts open. Once the cause of
the respective fault has been rectified and the supply voltage is switched off for approx.
1minute, the unit is ready for operation again.
} Contact malfunctions: If the contacts have welded, reactivation will not be possible after
the input circuit has opened.
} LED "POWER" does not light: Short circuit or no supply voltage.
Dimensions in mm
Technical details
General
Approvals CE, TÜV, cULus Listed
Electrical data
Supply voltage
Voltage 24 V
Kind DC
Voltage tolerance -15 %/+10 %
Output of external power supply (DC) 2 W
Residual ripple DC 160 %
Duty cycle 100 %
Max. inrush current impulse
Current pulse, A1 1,7 A
Pulse duration, A1 3,3 ms
Inputs
Number 2

Datalogic SE-SR2 Specifications

General

Brand	Datalogic
Model	SE-SR2
Category	Relays
Language	English