Datapath dL8 - Link) Connectors

Datapath dL8
Congratulations on your purchase. The Datapath dL8 is an eight output distribution amplier for
ultra-high resolution Dual-Link DVI signals.
One Dual-Link DVI input, supporting graphics sources with pixel clocks up to 330MHz and resolutions
beyond quad-HD (3840x2160 @ 30 Hz), can be delivered to up to eight outputs on separate DVI-D (Dual
Link)
connectors.
This Quick Start Guide is designed to aid quick installation and set up of your new dL8, however should
you experience any problems not covered in this guide please refer to your supplier.
Step 1
Packing List – Your box should contain:
3
• dL8 - Distribution amplier
• USB Cable
• Power Cable
• Quick Start Guide
• Software CD