Need help?Do you have a question about the Datavideo PTC-150W and is the answer not in the manual?
General| Camera Type | PTZ Camera |
|---|---|
| Image Sensor | 1/2.8" CMOS |
| Effective Pixels | 2.07 Mega Pixels |
| Resolution | 1920 x 1080 |
| Digital Zoom | 16x |
| Video Output | HDMI, 3G-SDI |
| Pan Angle | 340° |
| Operating Temperature | -10°C to 50°C |
| Horizontal Resolution | 1000 TVL |
| Aperture | F1.6 to F3.5 |
| Shutter Speed | 1/30s~1/10000s |
| Control Interface | RS-485 |
| Control Protocols | Pelco-D, Pelco-P |
| Power Supply | 12V DC |
| Minimum Illumination | 0.5 Lux |
| Connectivity | Ethernet |
Describes the PTC-150 HD/SD PTZ camera, its mounting options, zoom, and image adjustment functions.
Lists the main features of the PTC-150 camera, including resolution, zoom, format support, and connectivity.
Explains the functions of each button on the remote control for operating the camera.
Configure basic camera settings like name, mirror, white balance, focus, iris, and AGC.
Configure advanced camera settings like motor control, tally light, and reset options.
Set or recall up to 50 preset camera positions, including speed and waiting time.
Configure RS-422 settings, including VISCA ID and Remote Source, using DIP switches.
Configure IRID settings for camera identification (CAM1-CAM4) using DIP switches.
Step-by-step guide to set up DVIP for remote camera control using DIP switches and configuration tools.
Provides guidance on operating the camera using the DVIP control protocol.
Details the pin assignments for RS-422 communication between the camera and controller.
Provides guidance on operating the camera using the RS-422 VISCA control protocol.
Details VISCA communication parameters and network configuration.
Explains the structure of VISCA packets, including header, addresses, message, and terminator.
Describes how to send commands and make inquiries to the PTC-150 via VISCA.
Details ACK, Completion, and Error messages returned by the PTC-150.
Covers VISCA commands for device settings, including Address Set and IF_Clear.
Illustrates the protocol for VISCA commands, ACKs, and completions with examples.
Details messages issued by the camera, including ACK/Completion and Error messages.
Lists all available commands for controlling the PTC-150 camera, categorized by function.
Lists inquiry commands to retrieve camera status and settings.
To Next Page