Need help?Do you have a question about the Datavideo RMC-300A and is the answer not in the manual?
General| Brand | Datavideo |
|---|---|
| Model | RMC-300A |
| Category | Control Panel |
| Language | English |
General safety warnings and precautions for operating the Datavideo RMC-300A unit.
Details on standard warranty coverage and terms for Datavideo products.
Details on the extended three-year warranty coverage and registration.
Information on proper disposal of electronic waste and the meaning of CE marking.
Overview of the RMC-300A's main features and capabilities.
Description of the physical ports and connectors on the rear panel of the RMC-300A.
Using the VR knob for zoom and the LOCK button to control joystick movement.
Using the joystick for camera movement and selecting movement speed modes.
Buttons for recorder activation/deactivation and accessing camera OSD menu.
Controls for saving presets, adjusting white balance, and managing exposure settings.
Using auto focus/iris and manual controls for shutter, focus, iris, and gain.
Controls for transitions, cuts, and wipes between video sources.
Using composite keys for saving/recalling PTZ presets and accessing switcher functions.
Selecting cameras 1-24 and adjusting keyboard LED brightness.
Camera settings for shutter speed, focus mode, and video mode.
Manual white balance adjustment and detailed video configuration options.
Selecting video orientation modes for the camera feed.
Configuring baud rate, data bits, parity, and stop bits for serial communication.
Managing connected devices, scanning, loading, and saving device orders.
Viewing device information, MCU version, and latest firmware version.
Adjusting language settings and enabling/disabling serial ports.
Configuring host name, IP address, network mask, gateway, and DNS settings.
Selecting joystick speed acceleration modes: Nonlinear, Arithmetic, and Fixed.
Diagram illustrating the RMC-300A connection with cameras via DVIP protocol.
Configuring DHCP or static IP for network connection of the RMC-300A.
Detailed steps for configuring static IP addresses, network mask, gateway, and DNS.
Diagram illustrating the RMC-300A connection with cameras via RS-422 protocol.
Pinout information for creating a custom RJ-45 cable to connect RMC-300A to cameras.
Steps to download and install the latest firmware for the RMC-300A unit.
Physical dimensions and weight of the RMC-300A controller.
Information on how to get support, access FAQs, and find the latest manual updates.
To Next Page
