Need help?Do you have a question about the Datavideo SE-500 and is the answer not in the manual?
General| Interface | RS232 |
|---|---|
| Composite video in | 1 |
General safety instructions and warnings for operating the unit.
Information on FCC compliance and potential interference.
Details about the product warranty period and coverage.
Information regarding the proper disposal of the product.
Provides a summary of the SE-500's capabilities and features.
Lists the key features and specifications of the SE-500.
Details the items included in the product package.
Provides general advice on cabling and setup for optimal performance.
Describes the initial state of the SE-500 upon powering on.
Explains how to connect composite and S-Video sources to the SE-500.
Details the connection of RCA and 1/4 inch audio sources.
Discusses video and audio output connections and monitoring.
Describes the audio mixer functionality with mic and aux inputs.
Explains PC control via the RS-232 port.
Details the tally output for signaling.
Describes MIDI device connectivity for control.
Identifies and describes the functions of the front panel controls.
Details the ports and connectors on the rear of the SE-500.
Guide to setting input formats and audio levels.
How to choose between Y/C and YUV output formats.
Best practices for monitoring video and audio signals.
Simple method for switching between input sources.
How to perform dissolve transitions using the T-Bar.
Explains using wipe transitions and previewing them.
How to select the main and sub video sources for switching.
Adjusts brightness, contrast, color, and tint for video inputs.
Accesses settings for output format, remote control, and color bars.
Details how to set audio levels and interpret meters.
Explains how to choose between fade and wipe transitions.
Describes manual transition control using the T-Bar.
Covers auto-transition via RS-232 or MIDI control.
Enumerates various wipe transition types and their visual representation.
Combines 4 input videos into a single output on one monitor.
Squeezes Main and Sub Video Sources into a half-size screen.
Places the Sub Video Source in a window on the Main Video Source.
Freezes the incoming video from the Main Video Source.
Adds borders for Picture in Picture and Wipe effects.
Selects solid background colors for Main or Sub Video bus.
Demonstrates a typical four-camera setup for live events.
Illustrates a setup for a conference with presentations and audience reaction.
Shows a VJ setup for clubs combining video and audio effects.
Explains overlaying graphics using the SE-500 and CG-100.
Addresses issues related to the unit not powering on.
Troubleshoots lack of image or black and white output.
Solves problems with distorted or clipped audio.
Explains how to resolve frozen video output.
Addresses issues causing video distortion.
Provides practical examples of RS-232 control commands.
Defines technical terms used in the manual.
Covers video standards, quality, and monitor calibration.
Lists detailed technical specifications of the SE-500.
Describes the CG-100 for live SDI CG overlay.
Explains the PPT-100 for converting VGA to video.
Details the TLM-70D monitor specifications.
Explains the DAC-6 for converting DV to analog signals.
Details the BAC-03 audio converter specifications.
Describes the DV repeater for extending cable runs.
Details RS-232 commands for controlling the SE-500.
Lists MIDI commands for controlling the SE-500.
Provides cross-reference for tally signal pinouts.
Instructions for registering the product online.
Contact information for support and service worldwide.
To Next Page
