Safely Disposing Device:
The UbiSurfer should not be placed in household waste bins. Please check local regulations for information on the
disposal of electronic products in your area.
Overloading:
While charging your UbiSurfer avoid overloading the wall outlets or extension cords. This might result in a risk of fire or electric
shock.
Extreme Weather:
Make sure to unplug charging accessories during lightning storms or when unused for long periods of time.
Chapter 5
Important Safety Information
36
Resetting the Device:
Should you find that the software on the UbiSurfer does not work as expected, by either refusing to turn off or on, or is frozen or
any hardware component is not functioning properly, you may have to do a hardware reset. This is accomplished by (after turning
off the device if possible) inserting a pin into the reset hole on the underside of the UbiSurfer in the small hole with the word
RESET written over it. The method to do this is to slowly insert the pin until you feel a small resistance .Then push a little more
until a small pop is felt and/or heard. This should resolve the problem.
To Next Page
Loading...