EasyManua.ls Logo

Datex-Ohmeda D-VNC15 - User Manual

Datex-Ohmeda D-VNC15
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Datex-Ohmeda
Video Display, D-VNC15 (Rev. 03)
S/5 Video Display, D-VMC15 (Rev. 00)
Video Display, D-VHC17 (Rev. 02)
S/5 21” Display Monitor Unit, D-VSC21 (Rev. 01)
S/5 LCD Display, D-LCC10A/W (Rev. 01)
S/5 LCD Display, D-LCC15 (Rev. 00)
S/5 Display Controller Board, B-DISP (Rev. 01)
Technical Reference Manual
All specifications are subject to change without notice.
Document No. 8001004-1
June 2001
Datex-Ohmeda Inc.
3030 Ohmeda Drive
53707-7550 MADISON, WIS
USA
Tel. +1-608-221 1551, Fax +1-608-222 9147
www.us.datex-ohmeda.com
Datex-Ohmeda Division,
Instrumentarium Corp.
P.O. Box 900, FIN-00031
DATEX-OHMEDA, FINLAND
Tel. +358 10 394 11 Fax +358 9 146 3310
www.datex-ohmeda.com
Instrumentarium Corp. All rights reserved.

Table of Contents

Questions and Answers

  • B
    Breanna CarterAug 6, 2025
    What to do if the Datex-Ohmeda D-VNC15 Monitor screen is blank?
    • C
      Christopher GarciaAug 7, 2025
      If your Datex-Ohmeda Monitor's screen is blank, there are a couple of things you can check. First, if the power indicator on the front isn't lit, ensure the power cord is properly connected to both the monitor and the power outlet, and that the monitor is turned on using the ON/STBY switch. If the indicator is lit, the display might be in standby. Check the signal cable connection, tighten any loose screws, and if any pins are distorted, carefully straighten them with nose pliers.

Datex-Ohmeda D-VNC15 Specifications

General IconGeneral
CategoryMonitor
BrandDatex-Ohmeda
ModelD-VNC15
ManufacturerDatex-Ohmeda
Display TypeLCD
Screen Size15 inches
Resolution1024 x 768 pixels
Input Voltage100-240 V AC
Frequency50/60 Hz
Storage Temperature-20 to 60 °C
Weight5.5 kg
Humidity Range10% to 95% non-condensing
Operating Temperature10°C to 40°C