Davco BC604 SS - Fig. 7-2

10 pages

Save Page as PDF

To Next Page

To Next Page

To Previous Page

To Previous Page

Loading...

March 2010

March 6, 2009

Fig. 7-2

Table of Contents

IN THE CAB OF THE BRUSH CUTTER CARRIER IN A HIGHLY VISIBLE AREA1
WELCOME2
- Congratulations on your purchase of a DAVCO ®2
- Manufacturing BC604SS Brush Cutter. The DAVCO® Brush Cutter, when combined with an approved carrier, will provide you with unmatched durability, productivity and versatility. As an Owner or Operator, it is your responsibility to learn the capabilities...2
Personal & Property Safety3
- SPECIFICATIONS:4
Attachment type: Industrial Brush Cutter4
Model Number: BC604 SS4
Attachment Weight: 1500 lbs.4
Required Hydraulic Flow: 22-30gpm4
Required Hydraulic Pressure: 3000 psi4
- PLEASE NOTE:4
It is the responsibility of the owner/operator to inspect and maintain parts and equipment for the utmost reliability and safety.4
Periodically check all nuts and bolts for proper tightness and excessive wear.4
For the owner/operator’s convenience, DAVCO® Manufacturing has provided a parts list in this operator’s manual for replacement parts. Factory Replacement parts are to be used to maintain warranty.4
Before shutting off the hydraulic motor, gradually throttle down to idle before disengaging the hydraulic valve. This helps to prevent cavitation in the hydraulic motor, and to help slow the cutting disc down; it can be stalled into the ground or brus...4
- Fig. 7-29