Display Timing Sync
32 Steps Sequence speed divided by 32; one LFO cycle takes 32 steps
16 Steps Sequence speed divided by 16
8 Steps Sequence speed divided by 8
6 Steps Sequence speed divided by 6
4 Steps Sequence speed divided by 4
3 Steps Sequence speed divided by 3
2 Steps Sequence speed divided by 2
1.5 Step Sequence speed divided by 1.5
1 Step One cycle per step
2/3 Step Two cycles every three steps
1/2 Step Two cycles per step
1/3 Step Three cycles per step
1/4 Step Four cycles per step
1/6 Step Six cycles per step
1/8 Step Eight cycles per step
1/16Step Sixteen cycles per step
Tip: Use Clock Sync to modulate a parameter in time with the sequencer.
For example, an LFO set to a triangle wave and a frequency of 16 steps
can modulate the filter frequency for a sweep that is perfectly synced to
the sequencer.
Key Sync—When on, the LFO is re-started each time a new note is played. Key
Sync is set independently on each LFO.
20
To Next Page
Loading...
