3 Steps
Delay is 3 steps in length
1.5 Step
Delay is one and a half steps in
length
2/3 Step
Delay is two-thirds of a step in
length
1/3 Step
Delay is one-third step in length
1/6 Step
Delay is one-sixth step in length
Amount: 0…100 – Sets the delay amount of the selected delay tap. The left and right
channels are mixed into a single delay.
Feedback 1: 0…100 – Sets the amount of feedback from the summed output of all
the delay taps to the input of the delay.
Feedback 2: 0…100 – Sets the amount of feedback from the summed output of all
the delay taps to the input of the filter for more extreme effects.
Output Hack
Amount: 0…14 – Trashes the output signal, quite rudely.
Voice Vol
Level: 0…100 – Sets the voice volume; usually used for matching volumes between
Programs.
30
To Next Page
Loading...
