2
POOLSWEEPA Wallclima / Optima Pool Cleaners
Operating Instructions
1. INTRODUCTION
Thank you for purchasing a POOLSWEEPA Robotic Pool Cleaner.
We are sure that your POOLSWEEPA Robotic Pool Cleaner will provide you with reliable, convenient
and cost effective pool cleaning. Its reliable filtration in all pool conditions and all-surface climbing
brush enhance maximum pool hygiene.
The Robotic Pool Cleaners by POOLSWEEPA deliver advanced cleaning technology, long lasting
performance and easy maintenance.
2. SPECIFICATIONS
Motor protection: IP 68
Digital switch-mode power supply
Minimum depth: 0.80 m •Input – 100-250 AC Volts
Maximum depth: 5 m •50-60 Hertz
•180 Watt
•Output – <30 VDC
•IP 54
3. WARNINGS AND CAUTIONS
3.1. Warnings
•Use the originally supplied power supply only
•Ensure the electrical outlet is protected by a ground fault interrupter (GFI)
or an earth leakage interrupter (ELI)
•Keep the power supply out of standing water
• Position the power supply at least 3 m away from the edge of the pool
•Do not enter the pool while the pool cleaner is working
•Unplug the power supply before servicing
3.2. Cautions
When not in use store the Pool Cleaner on the Caddy in a shaded area.
Use the Pool Cleaner in the following water conditions only:
Chlorine Max 4 ppm
pH 7.0 - 7.8
Temperature 6-34°C
NaCl Maximum = 5000 ppm
To Next Page
Loading...