To Next PageTo Next Page
Need help?Do you have a question about the David White AutoLaser 3150 and is the answer not in the manual?
General| Brand | David White |
|---|---|
| Model | AutoLaser 3150 |
| Category | Measuring Instruments |
| Language | English |
Summarizes specifications for 3110-GR, 3150, and 3175 models.
Guidelines for safe use, hazards, and regulatory standards.
Detailed explanations of the instrument's features and controls.
Lists various construction and installation tasks for the laser.
Step-by-step guide for construction applications.
Specific instructions for ceiling grid installation.
Instructions for using the laser in a laydown position.
Covers self-leveling, plumbing, and laydown operations.
Adjusting rotation speed for different applications.
Using sweep/scanning and point-to-point for lines.
Using the instrument for a motionless laser dot.
Procedures for instrument leveling and axis errors.
Troubleshooting spindle motor issues.
Control of leveling reaction and drift detection.
Setting single axis grade for specific tasks.
How to disengage leveling for grading operations.
Setting dual or single axis grade for 3175.
ADS function and behavior within grade mode.
Fine-tuning vertical laser line location.
Procedure for replacing batteries.
Information on using the rechargeable battery pack.
Procedure to test X-axis calibration.
Steps for calibrating the X-axis on models.
Procedure to test and calibrate the Y-axis.
Calibrating Z-axis in laydown position.
Detailed steps for Z-axis calibration in laydown.
Care, storage, and disposal guidelines.
Detailed technical specifications for each model.
Basic troubleshooting for battery installation and health.
Steps for common operational errors like no rotation.
Details of the product warranty coverage and claims.
Overview and key features of the laser detector.
Powering on and operating the laser detector.
Unique detector features and maintenance advice.
Using the RC700 remote control for model 3150.
Using the RC400X remote control for model 3175.
