DaVinci Emmett M20101

Need help?

Do you have a question about the DaVinci Emmett M20101 and is the answer not in the manual?

Summary

Assembly Instructions

Step 1: Attach Part H5

Insert dowel H5 into the frame for initial assembly.

Step 2: Secure Support Rails

Step 3: Connect Side Panels

Step 4: Assemble Main Frame

Step 5: Install Base Supports

Step 6: Install Safety Bolts

Step 7: Mount Mattress Support

Step 8: Attach Mattress Slats

Step 9: Secure Mattress Platform

Step 10: Final Frame Assembly

Step 11: Complete Frame Connections

Important Safety Warnings

Before Assembly Precautions

Follow instructions, check parts for damage, and securely tighten fasteners before assembly.

Suffocation Hazards

Avoid plastic bags, small gaps, soft bedding, pillows, and comforters for infant safety.

Strangulation Hazards

Prevent strangulation from cords, strings, or loose fasteners on clothing or crib.

Fall Hazards

Lower mattress and remove climbing aids when child can stand or attempt to climb out.

After Assembly Recommendations

Mattress Size Requirements

Mattress must be 27 1/4" W x 51 5/8" L and a maximum of 6" thick.

Toddler Bed Conversion Guide

Toddler Bed Conversion Steps

Bed Size and User Safety Limits

Mattress Dimensions and Thickness

Mattress must be at least 51 5/8" L x 27 1/4" W, with a max thickness of 6".

User Age and Weight Restrictions

Minimum user age is 15 months; maximum weight is 50 lbs (22.7 kg).

Full Size Bed Conversion Guide