The provided document is a user manual for the DaVinci Fiona M20801 crib, which also supports conversion to a toddler bed and a day bed, and can be further converted to a full-size bed with additional components.
Function Description
The DaVinci Fiona M20801 is a multi-functional crib designed to grow with a child from infancy through toddlerhood and beyond. Its primary function is a safe sleeping environment for infants. The crib can be converted into a toddler bed and a day bed, extending its usability as the child develops. With additional, separately sold components, it can also be converted into a full-size bed. The manual emphasizes the importance of safety during all stages of use and assembly.
Important Technical Specifications
Crib Dimensions and Mattress Requirements:
- Mattress Dimensions: Any mattress used in this crib must be at least 27 1/4 inches (69 cm) in width by 51 5/8 inches (131 cm) in length.
- Mattress Thickness: The mattress thickness must not exceed 6 inches (15 cm).
- Crib Usage Limit (Height): Stop using the crib when the child begins to climb out or reaches a height of 35 inches (89 cm).
- Mattress Support Adjustment: The mattress support can be lowered as the child grows to prevent climbing out. The lowest position should be used when the child is able to pull to a standing position.
Toddler Bed Conversion:
- Model Number: M19699 (sold separately).
- Mattress Requirements: The toddler bed uses the same full-size crib mattress as the crib.
- User Age/Weight Limit: The intended user's minimum age must be at least 15 months old, and the maximum weight must not exceed 50 lbs (22.7 kg).
Day Bed Conversion:
- The manual indicates a day bed conversion but does not list specific model numbers or additional components for this stage. It is implied that the existing crib components are reconfigured for this purpose.
Full-Size Bed Conversion:
- Model Number: M5789 (sold separately).
- Mattress Requirements: The full-size bed conversion requires a full-size crib mattress at least 51 5/8 inches (131 cm) in length, 27 1/4 inches (69 cm) in width, and a maximum thickness of 6 inches (15 cm). This specification appears to be a typo in the manual, as a full-size bed would typically require a larger mattress than a crib mattress. It is likely intended to refer to a standard full-size mattress.
- User Age/Weight Limit: The intended user's minimum age must be at least 15 months old, and the maximum weight must not exceed 50 lbs (22.7 kg). Similar to the mattress specification, this weight limit seems inconsistent with a full-size bed, which typically accommodates older children or adults. This may also be a typo or refer to the weight limit for the bed frame itself when used by a child.
Hardware Components (for crib assembly):
- H1: 3-3/8" AHB (x4)
- H2: 2-3/8" AHB (x8)
- H3: 1-3/4" AHB (x8)
- H4: 1-5/8" AHB (x4)
- H5: 5/8" AHB (x22)
- H6: BN (x4)
- H7: 1 x 4 cm WD (x8)
- H8: MC (x4)
- H9: AWR (x2)
Usage Features
Assembly:
- The manual provides step-by-step instructions with clear diagrams for assembling the crib, toddler bed, and day bed.
- It emphasizes the importance of reading all instructions before assembly and keeping them for future reference.
- Tools required for assembly are depicted, including an Allen wrench (H9) and a screwdriver.
- Specific hardware quantities are provided for each assembly step.
Safety Warnings:
- General Safety: Failure to follow warnings and assembly instructions can result in serious injury or death. Users must check for damaged hardware, loose joints, bolts, missing parts, or sharp edges before and after assembly and frequently during use. The crib should not be used if any parts are missing, damaged, or broken.
- Suffocation Hazard: Never use plastic shipping bags or film as mattress covers. Infants can suffocate in gaps between crib sides and a too-small mattress, or on soft bedding. Pillows, comforters, or additional padding should never be added under an infant. Pediatricians recommend placing healthy infants on their backs to sleep to reduce SIDS risk.
- Strangulation Hazard: Strings can cause strangulation. Do not place items with strings around a child's neck (e.g., hood strings, pacifier cords). Do not suspend strings over the crib or attach them to toys. All fasteners must be tightened to prevent strangulation. The crib should not be placed near windows where blind or drape cords may strangle a child.
- Fall Hazard: When the child can pull to a standing position, the mattress must be set to the lowest position. Bumper pads, large toys, and other objects that could serve as steps for climbing out must be removed.
- Extra Bolts (H5): The crib is supplied with extra bolts (H5) to close holes accessible to the baby. Failure to use these bolts could result in injury if the baby's fingers get stuck in the holes. It is recommended to use these bolts to close the holes.
Conversion Features:
- Toddler Bed Conversion: Requires specific hardware (H1, H2, H5, H7) and involves replacing one of the crib sides with a shorter toddler rail (M19699, sold separately).
- Day Bed Conversion: Uses existing crib components and hardware (H1, H2, H7, H8) to remove one side of the crib, creating an open day bed.
- Full-Size Bed Conversion: Requires additional components (M5789, sold separately) and is intended for older children, though the mattress and weight specifications in the manual appear to be incorrect for a standard full-size bed.
Maintenance Features
Care & Cleaning:
- Wood/Metal Parts: Use a lint-free, soft cloth with a non-toxic cleaner. Wipe dry immediately.
- Avoid Damage: Do not use abrasive chemicals or materials to prevent scratches or other damages.
- Fabrics: For fabric components, use a non-toxic foaming fabric cleaner or leather cleaner as appropriate.
- Touch-up Kits: Available for purchase by contacting DaVinci Baby.
Storage:
- Controlled Environment: Store furniture in controlled environments due to material response to temperature and humidity.
- Avoid Direct Sunlight/Heat Sources: Do not place furniture in direct sunlight or near air-conditioning outlets, radiators, heaters, or humidifiers.
- Prevent Wood Changes: Extreme heat, cold, dampness, or dryness can cause noticeable shrinkage or swelling of wood. Direct sunlight can affect material coloring over time.
Part Replacement:
- Ordering Parts: Replacement or missing parts can be ordered by visiting davincibaby.com/parts or by contacting Million Dollar Baby Co. at (323) 768-0183.
- Mailing Address: 8700 Rex Rd. Pico Rivera, CA 90660.
- Non-Substitution: Do not substitute parts.
- Refinishing: If refinishing, use a non-toxic finish specified for children's products.
Warranty:
- One-Year Limited Warranty: DaVinci products are covered by a one-year warranty from the date of purchase. More details on the warranty policy are available at davincibaby.com/warranty.
Product Registration:
- Product registration is simple and can be done at davincibaby.com/registrations.
Need help?
General
To Next Page