CLEANING
REMOVABLE PARTS
:
All removable parts can be disassembled for
optimal cleaning. Immerse all pieces in isopropyl
alcohol overnight, rinse thoroughly with clean
water and dry before reassembling.
NON REMOVABLE PARTS
:
Do not submerge non-removable parts or unit in
any liquid.
• Mouthpiece: Remove gasket surrounding zirconium mouthpiece.
• Flavor Chamber: Remove cap and o-ring.
• Pearl: Twist counter-clockwise to remove. Be sure to clean
threaded post with brush or cotton swab.
• Chamber: Use Brush to sweep inside of oven and cotton
swab dipped in isoprophyl alcohol.
*Tip: Perform a burnoff cycle at max temp for 2 minutes after
cleaning.
• Exterior: Wipe down using the provided cleaning swab.
To keep the IQ working optimally and maintaining
the purest taste, we recommend that all parts
which come in contact with material or vapor are
cleaned regularly.
To Next Page
Loading...
