56 / EN
Washing Machine / User’s Manual
C
INFORMATION
• If a second auxiliary function conflicting with the first one is selected before starting the
machine, the function selected first will be cancelled and the second auxiliary function
selection will remain active.
• An auxiliary function which is not compatible with the programme cannot be selected. (See
"Programme and consumption table")
• Auxiliary Function buttons may vary according to the model of the machine.
4.3.10.1 Auxlary functons
•
Πρόπλυση
(Prewash)
A Prewash is only worthwhile for heavily soiled laundry. Not using the Prewash will save energy,
water, detergent and time.
C
INFORMATION
• Prewash without detergent is recommended for tulle and curtains.
•
Σύντομo
(Fast+)
When this function is selected, durations of relevant programmes get shorter by 50%.
Thanks to the optimised washing steps, high mechanic activity and optimum water consumption,
high washing performance is achieved in spite of the reduced duration.
•
Eπιπλέον ξέβγαλμα
(Extra Rnse)
This function enables the machine to carry out another rinsing cycle in addition to the one carried
out after the main wash. Thus, the risk for sensitive skins (babies, allergic skins, etc.) to be
effected by the minimal detergent remnants on the laundrwy can be reduced.
4.3.10.2 Functons/Programmes Selected by Pressng the Functon Buttons for 3
Seconds
• Drum Clean
To select this programme, press and hold the auxiliary function button 1 for 3 seconds.
Use it regularly (every 1-2 months) to clean the drum and ensure the required hygiene is provided.
Run the programme while the machine is totally empty. To obtain better results, put powder lime-
scale remover for washing machines into the detergent compartment no. “2”. When the programme
is over, leave the loading door ajar so that the inside of the machine gets dry.
C
INFORMATION
• This is not a washing programme. It is a maintenance programme.
• Do not run this programme when there are any objects in the machine. If you try to do so,
the machine will automatically detect that there is load inside and abort the programme.
•
Chld Lock
You can prevent children from tampering with the machine by using the Child Lock feature. Thus you
can avoid any changes in a running programme.
C
INFORMATION
• If the Programme Selection knob is turned when the Child Lock is enabled, "Con" appears
on the display. While the Child Lock is enabled, you cannot make any change in the
programmes, the selected temperature, the speed or the auxiliary functions.
• Even if another programme is selected with the Programme Selection knob while the
Child Lock is enabled, previously selected programme will continue running.
To Next Page
Loading...