EasyManua.ls Logo

davoline DVC 30 T - Technical Specification; Selection of Installation Equipment

davoline DVC 30 T
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
17
Some pans make
crackling or clicking
noises.
This may be caused by the
construction of your cookware
(layers of different metals
vibrating differently).
This is normal for cookware and
does not indicate a fault.
Technical Speci
fication
Ceramic Hob DVC 30 T
Cooking Zones 2 Zones
Supply Voltage 220-240V~
50/60Hz
Installed Electric Power 3000W
Product Size D×W×H(mm) 290×520×50
Building-in Dimensions A×B
(mm)
270×490
Weight and Dimensions are approximate. Because we continually strive to
improve our products we may change specifications and designs without prior
notice.
Installation
Selection of installation equipment
Cut out the work surface according to the sizes shown in the drawing.
For the purpose of installation and use, a minimum of 50mm space shall be
preserved around the hole.
Be sure the thickness of the work surface is at least 30mm. Please select
heat-resistant work surface material to avoid larger deformation caused by
the heat radiation from the hotplate. As shown below:
Warning: The work surface material must use the impregnated wood or other
insulation material.
37
www.elektromarkabolt.hu