1. Lid for water reservoir
4. Water tank with water level gauge
6. On/off button with indicator light
Before using the coff ee maker for the fi rst
time, brew two pots of hot water without
coff ee beans to remove any residues of dirt
left over from the manufacturing process.
Open the lid (1). Fill the water reservoir (4)
with the required amount of cold water. Do
not exceed the MAX mark on the water level
Place a paper coff ee fi lter in the funnel
(11) and fi ll it with the required quantity of
ground coff ee. Swing the fi lter holder (3) out
and insert the funnel. Swing the fi lter holder
Place the glass pot (9) on the hotplate (8) and
turn the coff ee maker on using the on/off
button (6). The indicator light comes on and
the coff ee maker starts to brew coff ee.
The coff ee maker is equipped with a drip-
stop function so that you can temporarily
(max. 30 seconds) remove the pot from
the hotplate during brewing to pour a cup
of coff ee. Replace the glass pot as soon as
possible, otherwise the funnel may run over.
Once the water has run through, lift the
glass pot from the hotplate and pour out the
If you leave the coff ee maker on, the hot
plate will keep the coff ee pot hot. The taste
of coff ee deteriorates gradually the longer
it is kept hot. The keep-warm function
automatically switches off after 40 minutes.
Turn the coff ee maker off and unplug it once
you have fi nished using it.