3337
WARNING
During both the rst installation and maintenance the POWER
in the supply line should be switched off.
Ÿ Ensure that the pump is mounted in a level position on the base plate, with an
inclination angle not exceeding ± 5°.
Ÿ Attach the pump securely to a stable, level base by utilizing screws inserted through
the openings in the base plate.
Fig 3
Fig 2Fig 1
WARNING
For emergencies and maintenance, the pump must be easily
accessible.
WARNING
The pumps must be installed in a dry position and protected
from the elements by means of a suitable cover.
NOTE
As advised on dimensions table, enough space for service and
maintenance access should be considered.
WARNING
The pump can be installed indoors or outdoors.
To Next Page