24
Schedule
The frequency of maintenance depends on how much you ride and under which conditions. Recreational riders
needs far less maintenance then o-road riders. The harder you ride, the more you have to take care of your bike if
you want it to last.
There are various time intervals for proper maintenance. Quick maintenance should be done before & after every ride.
Time after purchase Action Suggested
Everytime before
you ride
The 60 second check
30 days
(every month)
90 days
(every 3 months)
360 days
(every 12 months)
180 days
(every 6 months)
Check tire pressure, check brakes that they work,
check lights, check bolts (make sure everything is
tight), check battery gauge. Do not ride the ebike
unless everything is functional and proper.
Completely clean the bike, including the dust on the
motor and under the seat. Check for any abnormal
wear and tear or alignment problems.
Inspect frame and fork for paint cracks or bulges that
may indicate frame or part damage; pay particular
attention to all frame joints. Check wear and tear on
tires. Check range of battery.
Inspect all components of the ebike. Check that
connections are nice and tight. Look inside where you
controller is and clean in detail. Check that all plugs.
Go over every bolt and nut in your ebike.
Bring ebike for complete tune-up. Varying on the
ebike the ebike shop should complete a battery
discharge, tires should be changed depending on
wear and tear. All connections should be checked for
rust and looseness. All components should be
checked including charger, ignition and gauges.
To Next Page
Loading...
Need help?
General