Days Strider ST-1 - Free-Wheeling Lever Operation

Instruction BookletST-1
Issue 1 02/04/2010
7
Tiller Angle Adjustment :
1.Lift up the lever (G) to disengage the pin from hole's position.
2.Simultaneously, adjust the steering fore-aft to most comfortable angle, and ensure pin
is well locked in it's position.
Seat Rotation Adjustment :
1.Lift lever (H) upward to disengage pin.
2.Simultaneously, rotate seat (I) (or lift up to disassemble the seat) to most comfortable
angle, and ensure pin is well locked in it's position.
Figure 6
Figure 6
(H)
Figure 5
Figure 5
(G)
Circuit Breaker :
If scooter's circuit system malfunctions or over loaded, the circuit system will automatic
s
hut down the power to ensure driver's safety. After power off, by pressing button (J) to
regain power.
Free-Wheeling Lever :
To push scooter for short distances, put it in freewheel mode by pushing forward on free-
w
heel lever to N this disables the drive system and brake system. Pull free-wheeling lever
backward to D to re-engage drive and brake system; this takes scooter out of freewheel
m
ode.
Figure 8
Figure 8
(J1)
Figure 7
Figure 7
(J)