Multicast Loss
Delay: Use the arrow buttons to select from 1 – 300 seconds of delay
Status: Use the arrows to toggle between Enabled or disabled to turn the alarm ‘ON’ and ‘OFF’
Save: Saves all conditions and exits back to the Alarm menu.
Figure 7.
PAD/RBDS Loss
Delay: Use the arrow buttons to select from 1 – 300 seconds of delay
Alarm Type: Stagnant or Present.
PAD Field: Select among Station Long and Short Name, Program Type, Song, Artist, Album, Genre,
Comments field.
RBDS Field: PI (Call Letters), PS ( Program Service), PTY (Program Type) and RT (Radio Text).
Status: Use the arrows to toggle between Enabled or disabled to turn the alarm ‘ON’ and ‘OFF’
Save: Saves all conditions and exits back to the Alarm menu.
Figure 8
To Next Page
Loading...