Need help?Do you have a question about the DaySequerra M4.2S and is the answer not in the manual?
General| Dimensions | 1.75" H x 19.0" W x 12.0" D (4.45 cm x 48.3 cm x 30.5 cm) |
|---|---|
| Weight | 10 lbs (4.5 kg) |
| Audio Outputs | Balanced (XLR); Unbalanced (RCA) |
| Tuning Range | FM: 87.5 MHz to 108.0 MHz; AM: 520 kHz to 1720 kHz |
| FM Sensitivity | 1.0 μV (9.0 dBf) for 50 dB quieting |
| FM S/N Ratio | 72 dB (Mono); 68 dB (Stereo) |
| FM THD | 0.15% (Mono); 0.25% (Stereo) |
| FM Stereo Separation | 50 dB @ 1 kHz |
| AM Sensitivity | 20 μV (internal antenna); 3 μV (external antenna) |
| AM S/N Ratio | 55 dB |
| AM THD | 0.3% |
| Power Requirements | 100-240 VAC, 50-60 Hz, 25W |
| Frequency Response | 20 Hz to 15 kHz, +0.5/-1.0 dB |
Describes the controls and indicators on the front of the M4.2S unit.
Details the connectors and switches located on the rear of the M4.2S unit.
Configuration for automatically muting audio based on signal strength.
Selects A-D SPLIT mode for analog and HD Radio audio program streams.
Configuration and monitoring of various alarm conditions for the receiver.
Configures conditions for alarms, enabling or disabling them.
Sets up email alerts for active alarm conditions.
Checks for and installs new firmware versions for the unit.
Configures network connections like DHCP, IP address, and subnet.
To Next Page