1. Tuner Frequency and band selection – AM and FM band selections are available. The frequency
is displayed here in a large font.
2. Album art display window – Displays an the album image when available.
3. MPS/AUTO forcing and Multicast available – MPS forces the M4.2S into Analog Mode. AUTO is
displayed in this box indicating that the M4.2S has been forced into Analog. Selecting Auto forces the
M4.2S back to Digital – HD if available. Multicast stations that are available will be illuminated in a bold
font.
4. Alarm Status window – Indicates any active alarms in a bold red font.
5. Tuning buttons – Tune the frequency Up and Down. Holding the button for more than 3 seconds
will increase the speed by a factor of 2.
6. Preset selection- 50 AM and FM / Multicast stations can be stored. Holding a preset button for
more than 3 seconds will save the currently tuned station in that slot.
7. PAD/SIS/RBDS data window – PAD/SIS/RBDS data will scroll when available. PAD scrolls the
Station Long and Short Name, Program Type, Song, Artist, Album, Genre, Comments field. RBDS
scrolls the PI (Call Letters), PS ( Program Service), PTY (Program Type) and RT (Radio Text). Any
active alarm condition will override this data.
To Next Page
Loading...