Need help?Do you have a question about the Daytona DD125E-5C and is the answer not in the manual?
Details essential protective gear for riders and passengers to ensure safety during operation.
Users are responsible for selecting, installing, and using non-company accessories.
Guidelines for new bike function, engine break-in, and rotating speed limits.
Caution for EFI models regarding fuel injection system and ECU compatibility.
Identifies rear mirror, clutch grip, throttle grip, left/right switches, and brake lever.
Identifies the odometer on the motorcycle's dashboard.
Details the positions and functions of the ignition switch and its effect on the motorcycle.
Explains how to operate the headlock and security precautions when locking the bike.
Describes indicators like left/right turn signals, high beam, neutral light, and odometer functions.
Alerts riders about the water temperature indicator and actions to take when it turns red.
Explains the EFI light status and fuel gauge for EFI models, including warnings.
Details the functions of the horn, turn signals, clutch, overtake, headlight switch, and choke.
Describes the cutoff preset switch and its operation.
Details controls like cutoff switch, throttle grip, headlight switch, and electric start button.
Explains the steps for starting the engine using the electric start button.
Explains how to adjust the rear shock absorber position and spring tension.
Details the operation of the fuel tank switch for carburetor models.
Describes the fuel pump operation for EFI models and associated warnings.
Illustrates the international 5-gear shifting relationship chart.
Provides recommendations for engine oil type, viscosity, and importance of quality.
Advises on proper disposal of used lubrication oil to prevent pollution.
Specifies recommended tyre pressures, wear limits, and dangers of improper pressure.
Details the 1000km break-in period, speed limits, and RPM control for new bikes.
Lists essential checks before riding, including brakes, tires, oil, lights, and steering.
Advises against starting the engine in narrow spaces or while in gear.
Guides on gradual engine warm-up, clutch use, and gear shifting for smooth riding.
Warns against improper shifting and advises caution on wet roads.
Explains how to reduce speed, brake, shift to neutral, and park the motorcycle safely.
Details how to check oil level and warns about low/overfilling effects.
Provides step-by-step instructions for draining old oil and refilling with new oil, including oil quantities.
Instructions for removing and cleaning the oil strainer and ensuring the oil pump seal ring is intact.
Guides on cleaning, checking gap, replacing, and selecting the correct spark plug type.
Explains how to check, clean, and replace the air filter for optimal engine performance.
Details battery electrolyte, voltage checks, and precautions for connection and storage.
Guides on adjusting the clutch lever free play using locknuts and adjustment screws.
Explains how to adjust throttle cable free play and check connections for smooth operation.
Instructions for adjusting the carburetor idle speed for carburator models.
Covers checking sprocket, chain condition, lubrication, and cleaning procedures.
Guides on adjusting drive chain tension using axle nuts and adjusters.
Advises on checking brake disc wear and replacing it when it reaches the maximum worn limit.
Details the adjustment of the rear brake pedal free travel and locking mechanism.
Explains how to locate the fuse box and replace a blown fuse.
Describes coolant mixture, function, and how to check, add, and change coolant.
Covers checking brake fluid level, leakage, cable, disc, and lever/pedal free travel.
Warns about the corrosive nature of brake fluid and necessary safety precautions.
Guides on checking brake friction plate wear and when to replace it.
Details checking the brake fluid level and adding the specified brake fluid.
Provides troubleshooting steps for engine starting issues in carburetor models.
Guides troubleshooting for engine starting problems in EFI models, including indicator checks.
Advises on procedures after ECU replacement and handling EFI connector history.
Provides instructions for cleaning the motorcycle, avoiding high-pressure water, and drying.
Details steps for cleaning, draining fuel, adding antirust, and preparing the engine for storage.
Steps for checking the motorcycle after storage, including cleaning, battery, fuel, and testing.
Covers routine cleaning, checks, and explains maintenance schedule symbols.
Details physical specifications like size, wheelbase, weight, and load capacity for the DD125E-5C.
Lists engine details including displacement, compression ratio, power, and transmission type.
Covers lighting, battery, fuse, and horn specifications.
Provides details on cooling system components like fan switch, sensor temperature, and coolant capacity.
Details physical specifications like size, wheelbase, weight, and load capacity for the DD350E-6C.
Lists engine details including displacement, compression ratio, power, and transmission type.
Covers lighting, battery, fuse, and horn specifications.
Provides details on cooling system components like fan switch, sensor temperature, and coolant capacity.
Details physical specifications like size, wheelbase, weight, and load capacity for the DD400E-6C.
Lists engine details including displacement, compression ratio, power, and transmission type.
Covers lighting, battery, fuse, and horn specifications.
Provides details on cooling system components like fan switch, sensor temperature, and coolant capacity.
General| Ignition | CDI |
|---|---|
| Final Drive | Chain |
| Fuel System | Carburetor |
| Seat Height | 780 mm |
| Ground Clearance | 160 mm |
| Engine Type | Single cylinder, 4-stroke, air-cooled |
| Bore x Stroke | 56.5 mm x 49.5 mm |
| Starting System | Electric / Kick |
| Transmission | 5-Speed |
| Front Suspension | Telescopic fork |
| Rear Suspension | Dual shock absorbers |
| Front Brake | Disc brake |
| Rear Brake | Drum |
To Next Page
