EasyManua.ls Logo

Dazzvape Technology Daze One User Manual

Default Icon
3 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Daze One User Manual
=============================================================
FEATURES
1. Three adjustable voltage settings, vaping experience customize-able.
2. 15 seconds preheating, ready to vape in seconds.
3. 550mAh large battery, rechargeable with Micro-USB Port.
4. Ergonomic and stealthy.
5. Supports all 510 thread cartridges with a diameter of 12mm or less.
==========================================================
Specification
Dimensions (L x W x H):48x31x18mm
Battery Capacity:550mAh
Charging Time:About 1.5h
Resistance: 1.0ohm
Thread: 510 thread
How To Use The Daze One
1. Power On/Off
Press the power button 5 times consecutively to turn on/off the device.
2. Preheating
Turn on the device and press the power button two times continuously to activate
preheating (15 seconds). The indicator light will flash in sequence of red, green, and
blue until the preheating process is finished.
Question and Answer IconNeed help?

Do you have a question about the Dazzvape Technology Daze One and is the answer not in the manual?

Dazzvape Technology Daze One Specifications

General IconGeneral
Nicotine Strength5% (50mg)
RechargeableYes
Charging PortUSB-C
DisplayNo
Adjustable AirflowNo

Summary

Daze One User Manual

Features Overview

Highlights include adjustable voltage, 15-sec preheating, 550mAh battery, ergonomic design, and 510 thread compatibility.

Product Specifications

Details dimensions (48x31x18mm), 550mAh battery, 1.5h charging, >=1.0ohm resistance, and 510 thread type.

How To Use The Daze One

Covers essential operations like powering on/off, preheating, and adjusting voltage settings.

Power On/Off

Press the power button 5 times consecutively to turn on/off the device.

Preheating Function

Activate preheating (15 seconds) by pressing the power button twice. Indicator light shows progress.

Adjustable Voltage Settings

Change voltage by pressing the power button 3 times. Colors indicate levels: red 2.4V, blue 3.0V, green 4.0V.

Battery Charging

Red indicator stays on during charging, goes off when full. Max charging current 400mA.

Device Protection Features

Includes over-charging, over-time, short-circuit, and low-battery protection mechanisms.

Low Resistance Protection

Device stops functioning if load is below 1.0Ω; white light flashes 3 times.

Warnings and Precautions

Advises on legal age, keeping away from children/pets, no disassembly, avoiding hot surfaces or liquids.