DB Audio Xtinct 12 - Subwoofer Connection Methods; Series Connection; Parallel Connection; Stereo Parallel Connection

How to connect your subwoofer
Left Right
This section oers instructions on connecting your
subwoofer in a mono and stereo configuration. Each
side of the voice coil is 2 ohm each. Most amplifiers
are 4 ohm stable in mono. Please connect using
diagrams and descriptions below.
(Note: Please consult your amplifier user guide when connecting)
Connection in Series
Connection in parallel
Connection in parallel using two subs in stereo
06
Speaker Terminal Left -
Positive to Negative to Negative on Amp
Speaker Terminal Right-
Negative to Positive - to Positive on Amp
Connect Left and Right Positives -
Then connect to Positive on Amp
Connect Left and Right Negatives -
Then connect to the Negative on Amp
Connect all speaker Positives to
Positive on Amp
Connect all speaker Negatives to
Negative on Amp