Need help?Do you have a question about the DB Audio Xtinct 12 and is the answer not in the manual?
Details the key features of the T-Rex subwoofer series, including power handling, materials, and design.
Presents technical specifications for T-Rex subwoofer models, including power, Fs, Qts, and SPL.
Provides enclosure design specifications and diagrams for 10", 12" (x2) T-Rex subwoofers.
Details the key features of the Xtinct subwoofer series, such as high power, red finish basket, and voice coil.
Presents technical specifications for Xtinct subwoofer models, including power, Fs, Qts, and SPL.
Offers enclosure design details and dimensions for 12" (x2) and 15" Xtinct subwoofers.
Explains how to connect subwoofers in series for mono or stereo configurations.
Details parallel connection for subwoofers in mono or stereo setups.
Illustrates parallel wiring for two subwoofers in a stereo setup.
Introduces wiring configurations for the Karnage 12 subwoofer, noting its dual 1-ohm impedance.
Details the recommended series wiring for 2-ohm impedance with Karnage 12 subwoofers.
Explains the parallel wiring for 0.5 ohm impedance with Karnage 12 subwoofers.
Provides enclosure design specifications for Karnage 12 subwoofer, Design 1, using 18mm or 25mm MDF.
Provides enclosure design specifications for Karnage 12 subwoofer, Design 2, using 18mm or 25mm MDF.
Recommends specific amplifiers for T-Rex subwoofers, specifying model and impedance.
Recommends specific amplifiers for Xtinct subwoofers, specifying model and impedance.
Recommends specific amplifiers for Karnage 12 subwoofers, specifying model and impedance.
To Next Page
General
