DBPOWER BX-100 - Technical Data and FAQ; Technical Specifications; Frequently Asked Questions

5
Note: The device may malfunction due to incorrect use or operation. You can
press the button and hold it for 5 seconds to reset the device. Then turn it on
again, this time it should be functioning properly.
Technical Data
Power
Built-in high capacity Lithium battery
External USB 5V supply
Power input: 500-1000mA
Technical
Frequency
80HZ-20KHZ
FM radio
87.5-108MHz
SNR
≥90db (line out)
Sensitivity Rate
80db
THD
0.3% (line out)
Output power
2x 5W
Speaker
Φ45mm 3Ω 2x 3W
Music format
MP3、WMA、WAV,、APE、FLAC
Impedance
3 Ohm
Speaker size
240 x 55 x 61.5 mm
FAQ:
1. If the device won’t turn on:
Please check if the battery has an enough power, if it has not, please
recharge it and try to turn it on again.
2. Unable to charge
Please check if the power supplywas inserted accurately to the charging port.
Make sure that the USB cable is working properly.