Need help?Do you have a question about the dbx 1BX and is the answer not in the manual?
General| Input Impedance | 10 kΩ |
|---|---|
| Output Impedance | 600 Ω |
| Signal to Noise Ratio | > 90 dB |
| Type | Expander |
| Frequency Response | 20 Hz to 20 kHz, ±0.5 dB |
| THD | <0.1% |
| Dimensions | 1.75 x 4.5 x 5.5 inches |
| Total Harmonic Distortion | <0.1% |
Details on Expansion, Compression, Impact Recovery, and Ambience settings.
Specifications for transition level, frequency response, and dynamic range.
Lists THD, IMD, noise, and input/output parameters.
Describes connections for preamp, tape deck, and power.
Illustrates simple and complex wiring configurations.
Explains the function of Power, Transition Level, Compress/Expand, Impact Recovery, and Ambience knobs.
Details the operation of LED indicators and PRE/POST/BYPASS, TAPE/SOURCE buttons.
In-depth explanation of compression and expansion principles and usage.
Explains Impact Recovery and Ambience functions and their sonic effects.
Important notes for United Kingdom users regarding mains wiring and safety.
To Next Page
