Need help?Do you have a question about the dbx Di4 and is the answer not in the manual?
General| Type | Direct Box |
|---|---|
| Channels | 4 |
| Frequency Response | 20 Hz - 20 kHz, +0/-1 dB |
| Ground Lift | Yes |
| Signal to Noise Ratio | > 100 dB |
| Pad | -20dB |
| Outputs | 4 x XLR |
| Output Impedance | 600 Ohms |
| Power | Phantom Power or External PSU |
| THD | < 0.01% @ 1 kHz |
| Power Supply | 9V DC or Phantom Power |
Welcome and context about the dbx di4 Direct Box and its purpose.
Highlights the key features of the dbx di4, including DI units, pad switches, and controls.
Covers Level, Pan, and Attenuation controls for individual input channels.
Details the Headphone Level Control and Headphone Output Jack.
Describes the Unbalanced TS Input Jacks and the Power Status LED.
Connects the external DC power supply to the unit.
Outputs for creating independent monitor mixes.
Balanced signal outputs for connecting to mixers, stage boxes, or other destinations.
Instructions on converting unbalanced signals to balanced for audio systems.
Guidance on using the unit as a multi-channel stereo line mixer for monitoring.
Details on audio inputs, stereo line mixer outputs, and main XLR outputs.
Technical details on distortion, frequency response, S/N ratio, and crosstalk.
Information on power requirements, consumption, and physical dimensions/weight.
To Next Page
